9dee6cb2

10.2. Removal, installation and check of pedals of the brake system

Check and adjustment of the course of pedals of the working and parking brake are given in the Section Check and adjustment of the course of pedals of the working and parking brake.

Components of installation of a pedal of a working brake

1 — the Plug
2 — the Pillow
3 — the Pin
4 — the Wavy washer

5 — the Pedal of a working brake
6 — the Overlay of a pedal
7 — the Forelock
8 — the Returnable spring

Components of installation of a pedal of the parking brake

1 — the Socket of the switch of the parking brake
2 — Assembly of a pedal of the parking brake
3 — the Switch of the parking brake

4 — the Pedal of the drive of the parking brake
5 — the Overlay of a pedal
6 — the Cable of the parking brake
7 — the Clip


 PERFORMANCE ORDER

  1. The description of removal of a pedal of the drive of the parking brake is given below.
  2. Remove the lower left section of the dashboard (see the Head Kuzov).
  3. Release a pedal of the parking brake.
  4. Separate the socket of an electrical wiring of the switch of the parking brake
  5. Give 3 nuts and remove assembly of a pedal of the drive of the parking brake.
  6. Remove a clip and disconnect a torso of the drive of the parking brake.
  7. Turn out the screw and remove the switch of the parking brake.
  8. Remove a slip from a pedal.
  9. Installation is made upside-down.