12.1.3. Removal and installation of a cowl, its lock and decorative front grille

Components of installation of a cowl

1 — a cowl Support
2 — the Cowl
3 — the Pillow
4 — the Decorative front grille

5 — the Holding hook
6 — Isolation of a cowl
7 — the Lever of the holding hook
8 — Consolidation of a support of a radiator


  1. At installation of a cowl, especially new, it is necessary to adjust its situation.

When using of the centering bolt as a bolt of fastening of loops and the lock of a cowl the lock and a cowl will not manage to be adjusted. For adjustment replace the aligning bolt with a usual bolt with a washer.

  1. For adjustment of a cowl in the horizontal plane give loopy bolts, expose a cowl in required position and tighten bolts with effort of 13 Nanometers.
  2. Adjustment of height of a forward part of a cowl is made by rotation of its basic pillows.
  1. Turn out 8 bolts and remove the top casing of a support.
  1. Turn out two bolts and a nut and remove the cowl lock, previously having disconnected from it a driving cable.
  2. Grease the rubbing parts of the lock of a cowl with universal lubricant.
  1. Having by hand tightened bolts and a nut, adjust position of the lock of a cowl then tighten lock fixture with the required effort.