1. Give 3 nuts and remove assemblies of levers and edges of screen wipers.
2. Paste a protective tape on the lower part of a windshield.
3. Remove consolidation between a cowl and a fairing.
4. Remove clips and both lattices of a fairing.
5. Separate the socket э / the motor of screen wipers.

8. Turn out 9 bolts and remove the fairing panel.
9. Disconnect hoses from nozzles of washers and remove nozzles.
10. Installation is made upside-down. Tighten fixture with the required efforts.
11. In conclusion of installation tighten nuts of fastening of levers of screen wipers by hand and include screen wipers on one cycle. Adjust provisions of levers (see the Section Check of a State, adjustment and replacement of brushes of screen wipers) and tighten nuts with the required efforts.
12. After installation check that the top points of hit of streams of the washing liquid on glass were in the areas designated on an illustration, and the lower points – in a scope of screen wipers.

Check of nozzles of washers