9dee6cb2

12.2.2. Removal of a carpet of a floor and ware box of the central console

Components of installation of a carpet

1 — the Lower section of finishing of the central rack of a body
2 — Consolidation of a forward door
3 — Consolidation of a back door
4 — the Cover of a rack of a back suspension bracket
5 — the Floor covering of the luggage compartment
6 — Side finishing of a back seat
7 — the Overlay of a threshold of a back door
8 — the Back right seat
9 — the Back left seat
10 — the Front left seat
11 — the Overlay of a threshold of a back door
12 — the Front right seat
13 — an opening Cap in a ware box

14 — Plastina of a ware box
15 — the Ware box
16 — the Lower panel No. 2
17 — the Lower cover No. 2
18 — Nizhny Novgorod a segment of finishing of the central section of the dashboard
19 — the Carpet
20 — the Lower panel of the central section of the dashboard
21 — Side segments of finishing of the central console
22 — the Top panel of a ware box
23 — the Lower side panel
24 — the Footboard
25 — the Lower understeering panel


 PERFORMANCE ORDER

  1. Release a forward part of a floor covering of the luggage compartment from five clamps and remove it.
  2. Remove front and back seats (see the Sections Removal, dismantling, assembly and installation of front seats and Removal, dismantling, assembly and installation of back seats).
  3. Remove overlays of thresholds of doors, the lower sections of finishing of the central racks of a body, a cover of racks of a back suspension bracket, side finishing of back seats and a footboard.
  4. Remove in that order the lower side panels, the lower cover No. 2, the lower panel No. 2, the panel of finishing of the lock of ignition, the panel of finishing of the central console, the lower understeering panel, the lower segment of finishing of the central section of the dashboard, side segments of finishing of the central console (see the Section Removal and installation of the dashboard and the main ware box).
  5. Remove the top panel of a ware box in the central console, take an opening cap in a ware box, remove 2 caps of screws, turn out 2 screws and remove a plate of a ware box.
  1. Turn out 4 bolts and remove a ware box, separate the socket.
  1. Uncover number of the chassis (see Introduction).
  2. Turn out bolts and remove the lower anchors of seat belts.
  3. Wring out clamps and remove a carpet.
  4. Installation is made upside-down. Tighten fixture with the required efforts, replace the deformed clamps.