9dee6cb2

9.6. Replacement of side epiploons of back differential

Components of installation of side epiploons of back differential

1 — Laying
2 — the Stopper of a jellied opening
3 — the Power shaft

4 — the Lock ring
5 — the Epiploon
6 — Side transfer
7 — the Drain stopper


 PERFORMANCE ORDER

  1. Lower oil of back differential.
  2. Remove a power shaft, previously reliably having propped up it (see the Section Removal, dismantling, assembly and installation of back power shafts).
  3. By means of special adaptation remove side transfer of differential and remove from it the screw-driver a lock ring.
  4. By means of a special stripper take an old epiploon and press new aflush with an end face of its case.
  5. Apply universal lubricant on epiploon edges.
  6. Establish a new lock ring on tank transfer and establish transfer to differential.
  7. Make sure that side transfer of differential cannot be pulled out a hand, without special adaptation.
  8. Establish a power shaft and fill differential with oil according to requirements of Specifications of the Head the Transmission line.