9dee6cb2 датчики давления МИДАДА МИДА ДИ.

12.1.10. Removal and installation of the top hatch

Components of the top hatch

1 — a hatch Frame
2 — the Basic arm
3 — Guides of cables
4 — the Driving mechanism
5 — the Stopper of a driving cable
6 — the Water-collecting trench
7 — the Directing plate
8 — the Arm

9 — the Arm of the forward saloon lamp
10 — the Panel of a vetrootboynik
11 — Glass
12 — the Central holding frame
13 — the guide Block
14 — the Driving cable
15 — the Shading screen


 PERFORMANCE ORDER

  1. Remove a covering of a ceiling of salon (see the Section Removal and installation of finishing of a ceiling).
  2. Remove basic a hatch arm.
  3. Give 4 nuts and remove hatch cover glass up.
  4. Separate the socket, wring out 4 clamps and disconnect from the case of 4 drain tubes.
  5. Turn out 12 bolts and remove 6 arms.
  6. Give 6 nuts and remove the hatch case from a body.
  7. If necessary dismantling and assembly of the hatch you make Components of the top hatch according to an illustration.
  8. After assembly and installation adjust the provision of a cover of the hatch, moving it at the released fixture. Tighten fixture with the required efforts.